Standard Features
Request a Quote


Z Master® Professional 6000 - 29 hp (22 kW) Kohler® EFI 747 cc engine with 72 in. (183 cm) TURBO FORCE® deck.


Model Year
72 in. (183 cm) 29 hp (74928)
Request a Quote


Deck: 72 in. (183 cm)
Mowing Height Range
1 – 5.5 in. (2.4 - 14 cm)
Mowing Height Adjustments
0.25 in. (6 mm) increments
Fuel Tank Capacity
12 gal. (45 l)


Engine Make
Engine Model
Fuel Type
26.5 hp (19.8 kW)
747 cc
Air Cleaner
Heavy-duty canister


Hydraulic unitized pumps and wheel motors
Travel Speed
Forward: 11.5 mph (19 km/h)
Drive: 24 x 12–12 in. (61 x 30.5-30.5 cm)
Caster: 13 x 6.5–6 in. (33 x 16.5-15.2 cm) flat-free semi-pneumatic


3 x 1.5 in. (7.6 x 3.8 cm) tubular steel
Rollover Protection (ROPS)


Hydraulic System
Fluid: Premium synthetic


1–5/8 in. (4 cm) diameter levers; adjustable


Deck Construction
7 ga. TURBO FORCE® with bull nose-bumper
Housings: Cast iron
Bearings: Greasable ball
0.25 in. (6 mm) thick heat-treated steel
Blade Tip Speed
18,500+ fpm (5,640 m/min)

Standard Features

Exclusive TURBO FORCE® Deck
 High-capacity TURBO FORCE® decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE® decks can be fine-tuned in order to conquer changing turf conditions.  
7 ga., High-Strength Steel
 The TURBO FORCE® deck is constructed of 7 ga., high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10 ga. commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.  
Industry's Toughest Spindle Assemblies
 Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models.  
 72 in. deck will have tapered bearing only.  
A Flat Crisp Cut with Precision Blades
 (0.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.  
Deluxe Suspension Seat
 Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.  
Rubber Discharge Chute
 High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.  
Smarter Design in a Bull-Nose Bumper
 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.  
Patented Adjustable Baffle
 Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.  
Smooth, Powerful Response
 The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.  
Operator Information Center
 The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.  
Folding Rollover Protection System ROPS
 A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.  
Convenience and Comfort
 Operator controls are conveniently located. Large 1-5/8 in. (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.  

Request a Quote

 US/US TERR.  Canada  Mexico  OTHER INTN'L LOC.
  • *First Name:
  • *Last Name:
  • Business Name:
  • Title:

  • *Address:
  • *City:
  • *State:
  • *ZIP Code:

  • *Phone:
  • Work Phone:
  • *Email:
  • Preferred Color:
  • Purchase Timeframe:

  • Additional Accessories:
  • Comments:
  • Extended Warranty:
    (Subject to Availability)
    Yes No

  • Where did you hear about us?

Have a trade in?

  • Trade in Mfg:
  • Trade in Model:
  • Trade in Year:
  • Trade in Miles/Hours:

  • Trade-In Accessories:

Contacting out of state dealer?

  • Reason for contacting:
  • Delivery Method:
  • Please check here if you would like to receive Email notifications of promotions, sales and special events.
Invalid Captcha. Please check the box.
To help us prevent spam, please check the box below.

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.