With the power of a world-class 14.5 ft. lbs. Briggs & Stratton engine and carbide-tipped cutting teeth, the Pro Stump Grinder has the power to reduce any stump to wood chips. It's the quickest, easiest way to remove eyesores and tripping hazards!
Unlike commonly available grinders that are heavy and cumbersome, the DR Stump Grinder is light, without sacrificing strength and durability. Constructed of 12-gauge steel, it is light enough for anyone to handle.
So, why accept those landscape eyesores on your property? Eliminate stumps the easy way, and you'll open up new possibilities.
|Position the DR Stump Grinder over a stump, lock one wheel in place with the wheel brake, engage the cutting head, and pivot easily from side to side, shaving an inch or so with each pass. Reposition the machine and repeat until the entire stump is reduced to a pile of wood chips.|
|The cutter head features 8 steel teeth that are tipped with mining-grade tungsten carbide, a material 10 times harder than steel and which is used for drilling through bedrock. Spinning at 2,800 rpm, these teeth take a remarkable 360 "bites" per second!|
|With lugged, high-flotation tires and a lightweight design, the DR Stump Grinder is easy to transport to any stump on your property. And because of their size, the tires keep the machine elevated over the growing wood chip pile as you grind a stump away.|
|Simple Hand Controls|
|Control the wheel brakes and engine throttle right from the handle bars. Lock one wheel in place while you pivot the machine back and forth to grind away a stump. Unlock and reposition as needed, right from your working position.|